Fellowes Standard Morgana FRN-6, Руководство по обслуживанию

Страница: 18 / 67

R O T A R Y
PAGE 16
S E R V I C E
Section 4 DRIVE BELTS
Twin - Grip Drive Belt.................................................. Fig 4.11
4.1 Twin Grip Drive Belt
Remove the operator side cover to gain access to this belt which is
removed only after taking out the bearing housing bolts. This
allows the bearing housing more travel to give extra slack on the
belt which may then be wound off the pulleys in the direction
shown. (See fig.4.11).
When replacing the belt, wind it back on to the pulleys in the same
direction, being careful not to strain the belt.
WARNING
DO NOT ATTEMPT TO REMOVE OR REPLACE THE BELT
WITHOUT FIRST REMOVING THE BOLTS.
Remove Bolts Completely
Before Attempting to
Remove Belt
Belt Direction
Bearing Housing