Fellowes Standard Morgana FRN-6, Руководство по обслуживанию

Страница: 41 / 67

N U M B E R E R
PAGE 39
M A N UAL
Section 11 PLATEN
The platen may now be withdrawn through the operator side-frame
with the pulley and eccentric housings in place.
WARNING:
THE PLATEN SURFACE IS EASILY DAMAGED. TAKE
EXTRA CARE DURING REMOVAL AND REPLACEMENT
NOT TO DAMAGE THE SURFACE OF THE PLATEN.
Platen Eccentric ....................................................... Fig 11.21
11.2 .... Platen - Re-assembly
Re-assemble with both eccentrics facing as shown in Fig. 11.21,
ensuring that any shims that were removed are replaced.
Replace the adjustment lock-shaft with it's associated parts and
set the adjusting plates so that their slots are clear of, and do not
stick on, the lock-shaft.
Replace the pulley after the platen pressure has been set as in
section 11.3.
Once again, be very careful with the platen as it is easily damaged.
The Narrow Side of the Eccentric (without
a fixing hole) Must Face the Feeder End of
the Machine on Both Sides
This View is of the Operator Side Eccentric
-
Clutch Side Should Be Mirror Image