31
Click Done. You have now calibrated your printer.
Click Print to print your label.
For instructions on applying the label to the CD, please refer to Chapter 9.
Plain Paper
The plain paper method for calibration should be used with a blank sheet of paper.
Please do not use a label sheet, as you will need to fold the paper during
calibration.
Select the Plain Paper option and Click Next.
The next screen will look like this:
Figure 2.14 – Plain Paper Calibration method
Select your printer from the list.
Select the paper type: Letter or A4
Click Print.
After the page prints, do the following: (these instructions also appear on the
printed page itself)
Fold the paper so that the two letter A’s meet, being sure to keep the edges
of the paper as even as possible.
Crease the paper thoroughly, then unfold. (see printed page for details on
folding)
Repeat the process, but this time fold the paper so that the letter B’s meet,
being sure to keep the edges of the paper as even as possible.
Crease the paper thoroughly, then unfold. (see printed page for details on
folding)
Locate where the Vertical (up and down) crease crosses the “A” line, and
enter the number into the calibration screen for your “A” value.
Locate where the Horizontal (left and right) crease crosses the “B” line,
and enter the number into the calibration screen for your “B” value.
Click Done. You have now calibrated your printer.
Click Print to print your label.
For instructions on applying the label to the CD, please refer to Chapter 9.
