Felder AD 941, Руководство по эксплуатации

Страница: 51 / 72

51
!
!
212UAE
Planer-Thicknesser
A 941 / AD 941 / AD 951
10.3.2 Remove dust and shavings
Depending on the quantity of work, dust and chips have to be cleaned off the space under the thicknesser table perio-
dically.
See chapter entitled: >Greasing the height spindle (thicknesser planing table)<
Attention! Risk of material damage!
Only high quality machine grease order nr. 10.2.002 may be used!
Spray oils such as graphite and Mos2 oils may damage the guide tracks!
Attention! Risk of material damage!
Never use caustic or abrasive detergents.
The belt tension is factory set to the ideal value.
In time, the belt can stretch, causing the power transmissi-
on to deteriorate.
The belt tension must be corrected in such a case.
Replace the appropriate belt immediately should tears or
side tears appear during the monthly check
10.3 General maintenance instructions
10.3.1 Belt tension
10.3.3 Cleaning and lubrication
Note: Cleaning and care products are available as accessories (Felder catalogue).
Fig. 10-A0: Cleaning agent
We recommend that dust and chips are cleaned off the
machine on a daily basis, especially from the table sur-
faces.
Clean the operating foil with a damp cloth.
Never use caustic or abrasive detergents.
These could damage the foil keyboard and may affect
operation.
Service