![background image](http://html1.mh-extra.com/html/federal-signal-corporation/ss2000-plus/ss2000-plus_installation-and-operation-manual_3827536048.webp)
48
Using the
Encoder/Decoder
When a Report - All is executed, the polls the units in the Digital list and logs
each poll and response. When complete, the polls the units in the DTMF list,
converting the DTMF reply to the same format as the Digital information and logs each
poll and response.
To request a report from all of the sites, do the following:
1. Press the REPORT key from the STANDBY screen.
The LCD displays the following.
Select:
ALL or SITE
REPORT
STANDBY
2. Press ALL and the polls the sites in its site lists.
3. Press CLEAR to stop the process and return to the STANDBY screen.
To request a report from an individual site, do the following:
1. Press the REPORT key from the STANDBY screen.
2. Press MODE/SITE.
The LCD displays the following:
Enter Site:
Sites = 1 to 256
REPORT SEND to START
3. Enter the site number.
4. Press CLEAR to clear the site number for re-entry.
5. Pressing CLEAR again or MENU, stops the process and returns you to the
STANDBY screen.
6. Press SEND and the polls the site and logs the results.
The LCD displays the following:
Site#001
Requesting Report
REPORT
STANDBY