System Manual | 2013
VAIE 2000 | Voice Alarm Integrated Systems
1
VAC 2006 • VAR 2006
UK
8.3 < AudIo SEttInG > MEnu
Setting the audio parameters of the PA sources
Menu for accessing the panels for managing the audio parameters of the
music and voice sources.
Turn the knob to browse through the items listed and select the required item.
Then press Ok to confirm, or:
- Press MENU to return to the HOME page.
- Press ESC to return to the MUSIC menu.
The options of the AUDIO SETTINGS menu enable the following panels to be
accessed:
8.3.1 set> SPEECH LEVEL
Volume control for the voice sources connected to the VAC 2006.
8.3.2 set> CHIME
Volume control and assignment of voice sources for the CHIME.
8.3.3 InPut 1
Volume control and setting of the operating mode of the IN 1 input (MIC.).
8.3.4 InPut 2
Volume control and setting of the operating mode of the IN 2 input (MIC. or LINE).
8.3.1 Set> SPEECH LEVEL
Management of
voice
sources
Panel for setting the levels of the voice sources connected to the VAC 2006:
1- Emerg.unit
Emergency stations of the FMD range.
2-Broad. unit
Broadcasting stations of the MBTrange.
3-Mic 1 input
Microphone connected to the MIC 1 IN socket.
4-Mic 2 input
Microphone connected to the MIC 2 IN socket.
5-From remote
Other controllers connected to the LINk sockets on the VAC 2006.
•
Volume control:
Hold down the numerical key corresponding to the source then turn the +/- knob to
adjust the volume (range -80 to 0 dB).
8.3.2 set> CHIME
Management of the warning signal (chime)
Panel for setting the chime that is produced on activating a
voice
source.
•
Attivazione del tono di Chime
:
Press keys
2
,
3
and
4
then release them to set the chimes for the various different
sources:
2-Emerg. unit call
: FMD 2001 and FMD 2012 Emergency Stations for broadcasting
announcements connected to the “EMERGENCY UNITS”
socket.
3-Brd. unit call:
Microphone stations of the MBT 1106 or MBT 1112 ranges
connected to the “PAGING UNITS” socket.
4-Preced. call:
Inputs programmed to activate announcements by means of
precedence or VOX contacts.
Reference values:
on
=Chime active
oFF
=Chime not active
•
Adjustment of the volume of the Chime tone
:
Hold down key 1 and use the +/- knob to adjust the volume within the range from 0 to 255; the volume is common to all four inputs and is separate
from the volume adjustment assigned to the sources.
•
Loading the Chime tone
:
The Chime audio file is managed by the dedicated software (see page 83).
