System Manual | 2013
VAIE 2000 | Voice Alarm Integrated Systems
103
VAC 2006 • VAR 2006
UK
8.5.1
SPEECH LEVEL
Adjustment of the level of the
voice
sources
Panel for adjusting the levels of the voice sources connected to the VAC 2006
controller. To make the adjustments, press the numerical key corresponding to
the required source then turn the +/- knob .
It is possible to select values within a range from 0 to -80dB.
Press ESC to return to the OPERATOR menu.
8.5.2
BACKGRound tESt
Setting the background tests
Panel for enabling and disabling background testing of the critical sources
affecting the ability of the system to function in emergency conditions. The
categories for choosing the items subjected to diagnostics are listed as
shown in the figure opposite.
• The categories for choosing the items subjected to diagnostics are listed
as shown in the figure opposite.
> 2-Voice Alarms
see point 8.5.2.1
> 3-Amplifiers
see point 8.5.2.2
> 4-Power Supply see point 8.5.2.3
> 5-Control Input
see point 8.5.2.4
> 6-Communication see point 8.5.2.5
or
press ESC to return to the OPERATOR menu.
8.5.2.1 VoICE ALARMS
Setting the test for Emergency Sources
Panel for enabling and disabling the monitoring tests.
• Press the corresponding numerical key to select required item for opening
the sub-menu and then to enable or disable the diagnostic test (
on
= test
enabled /
off
= test disabled):
> 1-Local Emerg.
> 1-Microphone
> 2-Emerg. button
> 2-Configuration
> 1-SD card
> 2-Msg table
> 3-Emerg. unit
> 1-Ctr unit <1>
> 4-Messages
> 1-Evac message
> 2-Alert message
> 5-Line connect.
> 1÷6-Line
n
connect.
> 6-Remote Link:
> 1-Remote link A
> 2-Remote link B
> 3-Remote ctr
Note: The display will show the programming that has been set.
Press ESC to return to the BACkGROUND TEST panel.
