manualshive.com logo in svg

FBII XL-4, Руководство по программированию

Поделиться
Скачать
FBII XL-4 Скачать руководство пользователя страница 85

Section 8 - LCD Keypad Programming Questions

8–63

The account numbers can be up to four digits. If a three-digit account number is desired then
enter XXXb, where XXX is the desired three-digit account number followed by a blank
(depression of the SHIFT key followed by the 8).

If the partition should not report to CS#2 then enter a blank account number. To erase an
existing account number position the cursor on the first digit and depress the SHIFT key
followed by the 8 key.

Valid entries for the account number question includes the digits 0-9 and A-F (SHIFT 1 -
SHIFT 6). Enter the account number exactly the way it would be seen at the receiver.

The programming sequence accepts entry of both 0 and A as valid account number digits.
Depending on the format transmitted some of these digits may not be valid. Consult your Central
Station Manager to determine the valid digits accepted by your receiver for the format
transmitted.

Auto Dump Parameters

The control panel contains a system log feature which stores the past 128 events that have
occurred in time sequence. This log can be viewed at the keypad by an authorized installer,
retrieved through the EZ-Mate PC Downloader, or transmitted to a remote serial printer and
modem and to local serial printer through the addition of the 7130 Serial Printer Interface.

The transmission of the information to a remote or local printer is known as the Auto Dump
Feature. This feature can be used for locations that require a printed record of system
activity. This Auto Dump feature is in addition to any signals transmitted to the Central
Station.

The Auto Dump feature will transmit the system log information to a remote printer located
at the DUMP phone number (see question # 002). If this number is blank then the Remote
Auto Dump feature has not been selected but the Local Auto Dump feature is still enabled.
The DUMP phone number can be located at the Central Station, Alarm Company or any
location with a modem and printer. The Dump phone number can vary from account to
account.

The Auto Dump feature can be programmed to transmit automatically upon either of the
following conditions:

- DAILY
- WEEKLY

- MONTHLY

If many of your customers utilize the Auto Dump feature then it is important to stagger their
transmission times especially if they all transmit to the same Dump telephone number.

Auto dump is transmitted only once. If the signal is missed, the transmission will not be repeated.

The auto-dump feature will require the installation of dedicated equipment at the auto dump
location for receiving and printing the log dump information. This equipment includes:

MODEM - 300 Baud, 8 data bits 1 stop bit, auto-answer. Since this modem will be connected
directly to the telephone line and may be unattended, the modem parameters should be
selectable through the modem (example dip switches).

PRINTER - SERIAL printer capable of operation at 300 Baud, 8 data bits, 1 stop bit

In addition the system log information can be transmitted to a local serial printer through
addition of the 7130 Serial Printer Interface module. The Auto Dump feature can be disabled
in question #184. If the local printer feature is used, then the printer will activate using the
frequency specified within the programming sequence.

Содержание XL-4





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды