FBII XL-4, Руководство по программированию

Страница: 50 / 100

XL-4, XL-4B, and XL-5 LCD Keypad Programming Manual Version 4
8–28
question must be answered correctly based on the input power in order to insure an accurate
system time clock.
The standard value for the US is 60Hz.
UL
In UL Listed systems this option must be 60Hz.
System Timing
The System Timing section allows programming of the various timing options of the control
panel.
Bell Delay Time
067 BEL DEL 15S
01 (00-15)
Amount of time in 15 second increments prior to activating the bell (relay #1) upon system
activity. The value is specified in steps of 15 seconds from 00 to 14, with 15 meaning an
infinite delay. Example 00 = No delay, 03= 45 second delay.
Each alarm type has a programmable option (question 112) indicating whether the alarm
type adheres to bell delay. This allows certain emergency conditions to bypass the bell delay
if desired.
UL
In UL Listed systems this option must be 00.
Dialer Delay
068 DIAL DEL 15S
01 (00-15)
Indicates the amount of time before dialer activation in 15-second intervals. Similar to the
bell delay, an option exists to override the dialer delay for certain conditions.
UL
In UL Listed systems this option must be 00.
Exit Delay #1
069 EXIT DL1 15S
04 (00-15)
Specifies the exit delay in 15-second increments. The exit delay can be defined from 0 to 14
fifteen-second intervals, with 15 indicating an infinite exit delay.
The zone attributes (question # 164) allows selection of the desired exit delay.