manualshive.com logo in svg

FBII XL-4, Руководство по программированию

Поделиться
Скачать
FBII XL-4 Скачать руководство пользователя страница 69

Section 8 - LCD Keypad Programming Questions

8–47

Priority Selection

137 PRIOR    TR  x
_   (0 -F)

Indicates the processing priority for this trouble condition relative to other events for dialing
purposes. 0 = Highest priority, F = Lowest priority.

Trouble Type Momentary Triggers

138 MOM TRG TR x
NNNNNNNN

Indicates which of the voltage level triggers will be activated for a momentary time duration
for this Trouble Type. Triggers 1 - 8 are active high, they normally sit at 0V and upon
activation go to 12V, with 25mA maximum available current.

The FORWARD (INSTANT) and BACKWARD (CODE) keys will move the cursor position to
the desired trigger position, while the TOGGLE (0) key will change the Yes/No status of the
trigger.

Triggers 7 and 8 must be set to N if the XL-4705 relay module is used.

Trouble Type Latched Triggers

139 LAT TRG TR x
NNNNNNNN

Indicates which of the voltage level triggers will be activated for a maintained duration with
this Alarm Type. The triggers are selected by placing a Y in the appropriate trigger position.
Triggers 1 - 8 are active high, they normally sit at 0V and upon activation go to 12V, with
25mA maximum available current.

The FORWARD (INSTANT) and BACKWARD (CODE) keys will move the cursor position to
the desired trigger position, while the TOGGLE (0) key will change the Yes/No status of the
trigger.

Triggers 7 and 8 must be set to N if the XL-4705 relay module is used.

Trouble Type Relay 1 (Bell) Selection

140 RELAY 1 TR x
NONE

Indicates the action taken for this Trouble Type on relay #1. Relay #1 is typically the bell
output. If a bell is not used then relay #1 can be utilized for another application. The options
include:

NONE

PULSED

LATCHED

Press the 0 key to toggle between the available choices.

UL

For UL Listed systems this option shall be programmed "NONE".

Содержание XL-4





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды