Maintenance every year
BOMAG
55
BPR 25/40, BPR 25/50
Fig. 62
l
Check whether the hydraulic oil level is ap-
prox. 40 mm below the filler opening (Fig. 62)
(see mark on steering rod head), top up hy-
draulic oil if necessary.
For quality of oil refer to the "table of fuels and
lubricants".
Filling up hydraulic oil
Fig. 63
l
Shift the travel lever forward against the stop
(Fig. 63).
Fig. 64
i
Note
Lay a cloth down before loosening the venting
screw.
l
Slacken the bleeding screw (Fig. 64).
l
Wait until all air has escaped, then tighten the
bleeding screw.
Fig. 65
l
Fill in hydraulic oil to approx. 40 mm below the
edge of the filler opening (Fig. 65).
Go
to
Discount-Equipment.com
to
order
your
parts
