Operation
BOMAG
27
BPR 25/40, BPR 25/50
Fig. 20
l
Pull the rope by the starter handle quickly and
powerful as far out as possible (Fig. 20).
!
Caution
Do not let the starter handle hit back against
the engine.
l
If the engine does not start during the first at-
tempt, repeat the starting process.
Fig. 21
l
As the engine warms up open the lever (Fig.
21) of the choke slowly.
Fig. 22
l
Set the throttle lever (Fig. 22) to position
"MIN".
l
Run the engine warm for approx. 1 to 2 min-
utes in idle speed.
i
Note
Operation of the vibratory plate can be started as
soon as the engine responds to short throttle com-
mands.
!
Caution
When the engine is running leave the ignition
switch in position "I".
Fig. 23
l
If the engine stops again after approx. 3 to 5
seconds, close the choke again with the lever
(Fig. 23) and repeat the starting process.
Go
to
Discount-Equipment.com
to
order
your
parts
