Maintenance every 6 months
BOMAG
49
BPR 25/40, BPR 25/50
5.14 Cleaning the fuel sludge fil-
ter
!
Danger
Fire hazard!
Gasoline is easily inflammable, do not spill any
gasoline.
When working on the fuel system do not use
open fire, do not smoke.
Fig. 45
l
Close the fuel cock, unscrew fuel sludge filter
1 (Fig. 45) and wash it out with gasoline.
l
Check the O-ring for damage, if necessary use
a new one.
l
Turn the fuel sludge filter in tightly and mind
the O-ring (2).
5.15 Check the oil level in the vi-
brator housing
i
Note
Park the machine on level ground.
l
Clean the area around the level plug.
Fig. 46
l
Unscrew the bleeding screw (1) (Fig. 46).
l
Unscrew the oil drain plug (2) and check the oil
level.
The oil level must reach the bottom edge of the fill-
er and level bore.
l
If the oil level is too low top up oil immediately.
For quality and quantity of oil refer to the table
of fuels and lubricants.
l
Clean the oil drain plug and screw it in with
Omnifit FD 10 BOMAG P/N 00970016.
l
Screw the bleeding screw back in.
Go
to
Discount-Equipment.com
to
order
your
parts
