Safety regulations
BOMAG
14
BPR 25/40, BPR 25/50
Use only machines which are serviced at regular
intervals.
Do not use any starting aids like start pilot or ether.
Starting and operation of the machine is
closed rooms and trenches
Exhaust gases are highly dangerous! Always en-
sure an adequate supply of fresh air when starting
and operating in closed rooms and trenches!
Operation
The machine must only be operated with the steer-
ing rod folded down.
Guide the machine in a way that hands do not
knock against hard materials. Danger of injury.
Watch out for unusual noises and smoke when op-
erating the plate. Investigate the cause and have
the fault corrected.
The vibratory plate must only be operated at full
engine speed, as otherwise the centrifugal clutch
may be destroyed.
Never leave the plate unattended with the engine
running..
Parking the machine
Park the machine on level, firm ground.
Before leaving the machine:
l
park the machine so that it cannot turn over,
l
Shut down the engine.
Mark machines, which could be in the way, with a
clearly visible sign.
Filling in fuel
Do not inhale any fuel fumes.
Refuel only with the engine shut down.
Do not refuel in closed rooms.
No open fire, do not smoke.
Do not spill any fuel. Catch running out fuel, do not
let it seep into the ground.
Keep dirt and water away from the fuel.
Maintenance work
Maintenance work must only be performed by
qualified and authorized persons.
Keep unauthorized persons away from the ma-
chine.
Do not perform maintenance work while the motor
is running.
Park the machine on level, firm ground.
Working on the engine
Drain the engine oil at operating temperature –
danger of scalding!
Wipe off spilled oil, catch running out oil and dis-
pose of environmentally.
Store used filters and other oil contaminated ma-
terials in a separate, specially marked container
and dispose of environmentally.
Working on the fuel system
Avoid open fire, do not smoke, do not spill any fuel.
Catch running out fuel, do not let it seep into the
ground and dispose off environmentally.
Cleaning work
Do not perform cleaning work while the motor is
running.
Do not use gasoline or other easily inflammable
substances for cleaning.
When using a steam cleaner for cleaning do not
subject electrical parts and insulation material to
the direct jet or cover these items beforehand.
Do not guide the water jet directly into air filter and
air intake or exhaust muffler.
After maintenance work
After all maintenance work is completed reinstall
all guards and safety installations.
Repair
Repair work must only be performed by qualified
and authorized persons. Use our repair instruc-
tions for this work.
Exhaust gases are highly dangerous! Always en-
sure an adequate supply of fresh air when starting
in closed rooms!
Mark defective machines by attaching a warning
note to the steering handle.
Welding
Before starting welding work on the machine dis-
connect the battery and cover the fuel tank with in-
sulating material.
Go to
Discount-Equipment.com
to
order your parts
