Maintenance every year
BOMAG
54
BPR 25/40, BPR 25/50
Fig. 58
l
Tilt the machine to the opposite side and se-
cure it properly (Fig. 58).
l
Fill in oil through the filler and level inspection
bore.
For quality and quantity of oil refer to the table
of fuels and lubricants.
l
Park the machine on level ground.
Fig. 59
l
Check the oil level.
The oil level must reach the bottom edge of the fill-
er and level bore.
l
Clean the oil drain plug (2) (Fig. 59) and screw
in with Omnifit FD 10 BOMAG PIN 00970016.
l
Screw vent plug (1) tightly back in.
5.20 Check the hydraulic oil level
!
Caution
Park the machine horizontally.
Environment
Catch running out old oil, do not let it seep into
the ground and dispose off environmentally.
Fig. 60
l
Adjust the steering rod with height adjustment
(Fig. 60) so that the area with the level inspec-
tion plugs is horizontal.
l
Unscrew the plug.
Fig. 61
l
Hold the travel lever in forward position (Fig.
61).
Go
to
Discount-Equipment.com
to
order
your
parts
