Maintenance every 6 months
BOMAG
50
BPR 25/40, BPR 25/50
5.16 Check the V-belt tension, if
necessary replace the V-
belt
Checking the V-belt
Fig. 47
l
Remove the V-belt guard (Fig. 47).
l
Check condition and tightness of V-belt
i
Note
Compression measurement approx. 5 - 15 mm.
!
Caution
Replace a damaged V-belt.
The V-belt cannot be tightened manually. Al-
ways replace the V-belt, if the compression
measurement is exceeded.
Changing the V-belt
Fig. 48
l
Disassemble the safety cover (1) (Fig. 48).
l
Loosen screw (2).
l
Remove the front disc (3) from the centrifugal
clutch.
l
Take off the V-belt and replace it by a new one.
l
Attach the front disc (3).
l
Tighten the screws (2).
l
Refit the safety cover (1).
l
Assemble the top V-belt guard (Fig. 47).
Go
to
Discount-Equipment.com
to
order
your
parts
