Fayat Group Dynapac CP2100, Инструкция по эксплуатации

Страница: 93 / 130

Maintenance - Every 10 hours
2020-01-06 4812314580EN 87
Daily (Every 10 hours of operation)
Park the roller on a level surface.
When checking and adjusting the machine,
always turn off the engine and make sure the
forward/backward lever is in the neutral position.
When the engine is off in enclosed places, make
sure there is a good ventilation, to prevent
carbon monoxide poisoning.
Check the Diesel engine oil level
The oil dipstick is under the oil filling plug (1), on the left side
of the engine.
Be careful with hot engine parts and also with the
cooler when removing the oil dipstick. There is
risk of burns.
1. Remove the dipstick (2) and check if the oil level is
between the upper and lower parts. For further information,
refer to the Engine Manual instructions.
Check the engine coolant
The expansion tank is placed in the center, between the
operator platform and the engine compartment. To access the
expansion tank (3), remove both retaining bolts (1) and also
the protective plate (2).
Check if the coolant level is between the MAX and MIN marks
in the expansion tank (3). If necessary, remove the tank hood
and fill the level.
NEVER open the expansion tank cap if the
engine is still hot and always use protective
gloves and goggles.
When filling with coolant, always use a mixed solution with
50% of water and 50% of additive. Refer to the lubricant
specifications in this manual and in the engine instructions
manual.
2
1
Fig. – Engine compartment
1. Oil filling plug
2. Oil dipstick
1
Fig. - Expansion tank
1. Bolts
2. Protective plate
3. Expansion tank
2
3