Fayat Group Dynapac CP2100, Инструкция по эксплуатации

Страница: 70 / 130

Towing
64 4812314580EN 2020-01-06
Lifting
Lifting the roller
Make sure the front wheels are parallel with the frame before
lifting the roller.
Make sure the hooks are safely placed in the
lifting eyes. The equipment shall only be lifted
by the proper lifting eyes.
Always use cables and steel chains according to
the safety norms and make sure there are no worn
components and that parts are not damaged during
the lifting.
The machine's gross weight is specified in the
hoisting plate (1). Refer also to the Technical
Specifications.
Do not go under or next to the machine when it
is being lifted.
Make sure the lifting hooks are safely connected to the
machine. Check the machine gross weight and the
compatibility of the lifting equipment.
Lifting the roller with a jack
The machine's gross weight is specified in the
hoisting plate (1). Refer also to the Technical
Specifications.
Lifting devices such as a jack (2) or equivalents
must be dimensioned according to the safety
regulations for lifting devices.
Do not go under or next to the machine when it
is being lifted. Also check if the lifting device is
fixed and secure in its position, and at a steady
level and surface.
The roller shall only be lifted with a jack or similar if it is
correctly fitted in the lifting eyes. The frame is reinforced in
these points to support the tension. Lifting at any other place
can result in damage to the machine or personal injury to the
operator.
Fig. - Roller prepared for lifting.
1
Fig. - Roller lifted with the jack
1. Hoisting plate
2. Jack
1
2