Fayat Group Dynapac CP2100, Инструкция по эксплуатации

Страница: 55 / 130

Operation
2020-01-06 4812314580EN 49
Starting the engine
Make sure the emergency stop system (2) is off (upper
position) and the parking brake is on.
The forward/reverse lever (1) shall be in the neutral position.
The Diesel engine cannot be started if the lever is not in this
position.
When sitting on the operator's seat, turn the ignition key (3) to
the right (the first position I) and then to the start position.
Release the switch as soon as the engine starts.
Do not try to run the start engine for too long (max.
30 seconds). If it does not work, wait 60 seconds to
try again.
Let the engine idle for a few minutes or more if the
environment temperature is below 50 F (10º C).
When the engine is running indoors, make sure
if there is proper ventilation to extract the
exhaust gases.
1
Fig. - Control panel
1. Forward/reverse lever
2. Emergency stop button
3. Ignition key
3
2