Fayat Group Dynapac CP2100, Инструкция по эксплуатации

Страница: 107 / 130

Maintenance - Every 250 hours
2020-01-06 4812314580EN 101
Replace the Diesel engine oil filter
Never perform any maintenance work under the
machine while the engine is still operating. Always
park the roller on a flat and safe place and chock the
tires.
The oil filter (1) is on the right side of the engine compartment.
Refer to the Engine Instructions Manual to obtain information
about the oil filter replacement.
Check and clean the hydraulic water and Diesel
engine water coolers.
1. Make sure the air flow through the coolers is unobstructed.
If the cores are dirty, wash them with flowing water (with
the engine cold) and blow them with compressed air.
When using compressed air, always use protective
goggles.
Whenever possible, clean the cores on the
opposite direction to the fan air flow. Every
time you clean the core, cover the electric and
electronic components.
Check the air conditioning (if equipped)
Check the coolant hoses and connections and make sure
there is no sign of oil. If there is oil, maybe there is a possible
leakage as well.
Fig. - Air conditioning
1. Coolant hoses
2. Condenser element
1
2
Fig. - Coolers
1. Recharge air cooler
2. Water cooler
3. Hydraulic oil cooler
4. Cooler grid
1
2
3
4
Fig. – Engine compartment
1. Oil filter
1