Fayat Group Dynapac CP2100, Инструкция по эксплуатации

Страница: 8 / 130

Introduction
2 4812314580EN 2020-01-06
General Information
This manual contains instructions to operate and
perform the maintenance of the machine.
The machine's maintenance shall be made correctly in
order to obtain the maximum performance and the
equipment shall also be kept clean, so leakage, loosen
bolts and connections can be found as soon as
possible.
Perform a daily inspection in the machine before
starting, so you can find possible leakage or other
failures.
Verify the machine's floor. Leakages are easier
detected on the floor than on the equipment itself.
THINK ABOUT THE ENVIRONMENT! Do
not dispose oil, fuel or other hazard
substances to the environment. Always
dispose correctly used filters, draining oil and
fuel residues.
This manual contains instructions for periodic
maintenance, which is usually performed by the
operator.
Other engine instructions can be found at the
manufacturer's manual.
CE Marking and Statement of Compliance
(APPLIED TO MACHINES SOLD WITHIN THE
EUROPEAN COMMUNITY)
This machine has a CE Marking. It shows that at its
delivery, it meets all the applicable health and safety
basic directives, according to 2006/42/EC Machinery
Directive, besides attending other directives applicable
on machinery.
Following the machine there is a "Statement of
Compliance" specifying the directive and supplement
applicable, as well as the harmonized norms and other
regulations relevant to the case.