Fayat Group Dynapac CP2100, Инструкция по эксплуатации

Страница: 103 / 130

Maintenance - Every 50 hours
2020-01-06 4812314580EN 97
Lubricate the upper/lower pivot bearing
1. Lubricate the grease fitting of the upper pivot bearing (1)
and the grease fitting of the lower pivot bearing (2) by
operating the grease gun manually with five pump strokes.
2. Use the grease according to the lubricant specifications
recommended by DYNAPAC .
Replace the wheel gear oil
Be extremely careful when draining the oil. Use
gloves and protective goggles to prevent the
hot oil getting in contact with the skin, which
can cause burns.
1. Unscrew the drain plug (1).
2. Put a container with 5.28 gal (20 liters) of capacity under
the drain plug.
3. Unscrew the drain plug (1) and the filling plug (2) to
evacuate the air. Allow all the oil to drain out to the
container and refit the plugs.
TAKE CARE OF THE ENVIRONMENT: All the
used oil shall be properly stored for
subsequent disposal. Do not dispose of oil
on the ground, sewage system or other place
which can harm the environment.
1 2
Fig. - Pivot bearings
1. Upper pivot bearing grease fitting
2. Lower pivot bearing grease fitting
Fig. - Wheel gear
1. Drain plug
2. Filling plug
1
2