manualshive.com logo in svg

Fayat Group BOMAG BW 213 D-5, Инструкция по эксплуатации, Инструкция по обслуживанию

Поделиться
Скачать
Fayat Group BOMAG BW 213 D-5 Скачать руководство пользователя страница 87

5.3 

Checking the engine oil level

NOTICE!
Danger of engine damage!

– If the engine is warm, shut it

down and check the oil level after

five minutes. With a cold engine

the oil level can be checked

immediately.

– Use only oil of the permitted

specification

 

Ä

 Chapter 8.3.1

„Engine oil“ on page 139

.

Protective equip-

ment:

n

Working clothes

n

Protective gloves

1.

Pull the dipstick out, wipe it off with a lint-

free, clean cloth and reinsert it until it bot-

toms.

2.

Pull the dipstick out again.

ð

The oil level must be between the “MIN”

and “MAX” marks.

3.

For topping up, clean the area around the

filler opening.

4.

Unscrew the cap and fill in engine oil up to

the “MAX” mark.

5.

Close the cap.

Fig.  39

Tests before taking into operation – Checking the engine oil level

 

BW 213 D-5

 

87

Содержание BOMAG BW 213 D-5































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды