Fayat Group BOMAG BW 213 D-5 Скачать руководство пользователя страница 134

Страница: 134 / 222

8.1

Preliminary remarks and safety notes

DANGER!
Danger to life caused by an

operationally unsafe machine!

– The machine must only be serv-

iced by qualified and authorized

personnel.

– Follow the safety regulations for

WARNING!
Health hazard caused by fuels

and lubricants!

– Safety regulations and environ-

mental protection regulations

when handling fuels and lubri-

cants must be followed

Chapter 3.4 „Handling fuels

and lubricants“ on page 32

CAUTION!
Danger of being injured by the

engine hood dropping down!

– Always secure an opened engine

hood.

The terms right/left always correspond with

travel direction forward.

Always clean machine and engine thor-

oughly before starting maintenance work.

For all maintenance work park the machine

is secured condition

Chapter 6.7 „Park

the machine in secured condi-

tion.“ on page 115

Maintenance – Preliminary remarks and safety notes

BW 213 D-5

134

Содержание BOMAG BW 213 D-5































































































































































































































Результаты поиска

Содержание BOMAG BW 213 D-5

Отзывы:

Бренды по названию

Популярные бренды

Fayat Group BOMAG BW 213 D-5, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание BOMAG BW 213 D-5

Отзывы:

Бренды по названию

Популярные бренды