Fast 973P Series, Руководство оператора

Страница: 41 / 68

41
4.11 STORAGE
STORAGE SAFETY
1. Store unit in an area away from human activ-
ity.
2. Do not permit children to play on or around
the stored sprayer.
3. Unhook and store in the transport confi gura-
tion.
4.11.1 PLACING IN STORAGE
At the end of the spray season, the machine should
be thoroughly inspected and prepared for storage.
Repair or replace any worn or damaged components
to prevent any unnecessary down time at the begin-
ning of the next season. Follow this procedure:
1. Thoroughly wash the machine using a hose or a
pressure washer to remove all dirt, mud, debris
or residue.
2. Thoroughly wash the inside of the tank and spray
system with the wash cycle to remove all chemi-
cal residue using the method described in the
Maintenance Section.
3. In climates that encounter freezing temperatures
during the storage period, the following prepara-
tion should be done:
a. Add 10 gallons (40 liters) of potable RV
antifreeze to the tank.
b. Run unit for 5 minutes in the wash and spray
cycles to circulate solution to all parts of the
circuit.
c. While circulating the fl uid, open and close all
the valves in the chemical and eductor tank
circuits several times to fl ush all the water
from the system.
d. Draw the solution out of the chemical tank.
e. Flush the solution out the booms.
f. Open all disconnects and drain hoses,
pumps, fi lters, solenoids and tanks.
g. Remove nozzles from boom. Disas-
semble and wash nozzle, spring,
diaphram and housing. Store inside.
Nozzles
Fig. 60 STORAGE
Filters (Typical)
Pump Drain