Fast 973P Series, Руководство оператора

Страница: 9 / 68

9
2.2 OPERATING SAFETY
1. Read and understand the Operator’s Manual and
all safety signs before using.
2. Place all controls in neutral, stop tractor engine,
turn monitor off , set park brake, remove igni-
tion key, wait for nozzles to stop spraying before
servicing, adjusting, repairing or unplugging.
3. Before spraying a fi eld, be familiar with all
potential hazards: trees, rocks, ditches, gullies,
etc. Plan the spraying route to avoid hazards.
Remember you are driving a wide machine. USE
CAUTION WHEN CORNERING.
4. Keep hands, feet, hair and clothing away from all
moving and/or rotating parts.
5. Do not allow riders on the sprayer or tractor dur-
ing operation or transporting.
6. Clear the area of all bystanders, especially
children, before starting or fi lling with water or
chemical.
7. Stay away from wing pinch points when folding
or extending wings. Keep others away.
8. Stay away from power lines when extending or
folding wings. Electrocution can occur without
direct contact.
9. Read chemical manufacturers warnings, instruc-
tions and procedures before starting and follow
them exactly.
10. Do not breathe, touch or ingest chemicals.
Always wear protective clothing and follow safe
handling procedures.
11. Spray only when potential for chemical drift is
at a minimum. Even small amounts can aff ect
neighboring crops or sensitive plants and people.
12. Dispose of chemical containers by triple rinsing
them into the sprayer tank or thoroughly rinsing,
crushing and delivering to regional disposal site.
13. In case of poisoning, get immediate medical at-
tention.
14. Only rinse sprayer while still in the fi eld. Spray
the rinse thinly over the fi eld already sprayed.
Never contaminate the farmyard or drainage
systems with sprayer rinse.
15. Do not eat in the fi eld when spraying.
16. Before applying pressure to the hydraulic system,
make sure all components are tight and that steel
lines, hoses and couplings are in good condition.
17. Before applying pressure to chemical system
make sure that all connections are tight and that
all hoses and fi ttings are in good condition.
18. Review safety instructions annually.