Fast 973P Series, Руководство оператора

Страница: 65 / 68

K
wick
I
nitial
S
tartup
S
heet
Cab electrical hookups for 12 volt negative ground systems only !
Raven 450 console cable
Plug the 16 pin connector into the back of the console and also the
3 pin speed sensor cable.
Large 12 gauge red wire Connect to positive (+) battery terminal or positive electrical outlet.
Raven provides an in-line fuse.
If you remove this make sure this connection is still fused.
Large 12 gauge white wire Connect to negative (–) battery terminal or negative electrical
outlet.
Orange wire , positive (+) power switched by the on/off switch
on the from Raven console. Does not have to be hooked up.
Can be used to power sky-track speed sensor or remote run/hold
switch.
Orange/white wire -remote run/hold wire used primarily with an
on/off foot switch or remote control on/off switch. Does not have
to be hooked up.
Supplying positive (+) 12 volts to this wire will override the master
on/off switch on Raven console and turn the booms on.
Dual weather pack connector with orange wire and white wire .
Does not have to be hooked up.
Orange is positive (+) power and white is (–) negative switched by
Raven console on/off switch.
Can be used to power other options using 10 amps or less.
Fast Boom Function Control Box (toggle box) Standard
with a three prong universal plug-in connector.
If your tractor is not equipped with this style connector the plug can
be cut off and wired as follows: Red-positive, Black- negative.
Sky track Speed Sensor
Blue wire to positive 12 volts hot.
Foam Marker Black wire to 12 volts negative (-) White wire to 12volts positive
(+)
Raven G1 and G2 Autoboom Black wire to 12 volts negative (-) Red wire to 12volts positive (+)
Norac Sonic Boom Height cable Standard with a three prong universal plug-in connector.
Turn power switch to on. If screen does not light up recheck
your power connections. Screen should read US. If not press CE key on console until you
scroll to US. When the screen reads US press enter.
Screen should now read SP1. SP 1 is used for wheel magnet and proximity style sensors.
SP 2 is used for radar and GPS (sky tracker) applications.
Use the CE key to scroll to correct setting and press enter.
Screen should now read C-SD-STANDARD VALVE. This is the valve used on Fast Sprayers. Scroll with the CE key until
C-SD-STANDARD appears and then press enter.
The information provided on this sheet is a quick-start guide to hookups and programming of this machine.
Before operating sprayer all operation and safety manuals must be reviewed and followed! Much
more detailed information is included in the manuals and also additional programming options.
Raven 450 console programming
6/29/2012 1