Fasep RGU600E, Инструкция по эксплуатации

Страница: 20 / 168

INSTRUCTION, USE
AND MAINTENANCE MANUAL
GB
Page 20 of 168
7522-M001-14_P
GG40256.11SL - GG40256.11ST - GG40256.15
GG40256T.15 - GG40256A.15 - GG40256D.15
GG40256TD.15 - GG40256.15SL - GG60360.15
GG60360T.15 - GG60360A.15 - GG60360D.15 - GG60360TD.15
11.0 CONTROLS
11.1 Cable control device
The control (handle control) can be moved according
to the positioning necessities of the operator.
The operator should place the control in a zone free
from obstacles in order to see clearly and completely
the operative zone.
MAKE SURE THERE ARE NO PER-
SONS OR OBJECTS HIDDEN TO
THE OPERATOR VISUAL FIELD
BY THE WHEEL SIDE PLAY (ESPE-
CIALLY IN CASE OF WHEELS WITH
LARGE DIMENSIONS).
The “lever A ” has four maintained control operative
positions:
- Lever rightwards or leftwards, operates respectively
the mandrel holder carriage shifting rightwards or
leftwards.
- Lever upwards or downwards: it operates respectively
the rising and the lowering of the mandrel holding
arm.
“Pedal B ” controls mandrel clockwise and counter-
clockwise rotation.
“Button
C ” has one “hands-on” operating position,
and when pressed, it operates the counter-clockwise
rotation of the tool holder head (from behind the
tool) (GG40256.15, GG40256T.15, GG40256D.15,
GG40256TD.15, GG60360.15, GG60360T.15,
GG60360D.15 and GG60360TD.15).
“Button
D ” has one “hands-on” operating position, and
when pressed, it operates the clockwise rotation of the
tool holder head (from behind the tool) (GG40256.15,
GG40256T.15, GG40256D.15, GG40256TD.15,
GG60360.15, GG60360T.15, GG60360D.15 and
GG60360TD.15).
“Push-button
E ” has a maintained control position,
and when pressed, it operates the self-centring chuck
opening.
“Push-button
F ” has a maintained control position,
and when pressed it operates the self-centring chuck
closing.
“Button
G ” has one “hands-on” operating position:
when it is pressed and lever “ A ” or “ H ” is laterally
shifted at the same time, it doubles the translation
speed of the self-centring carriage and of the tool holder
carriage respectively.
“Lever
H ” has four maintained control positions:
- Lever rightwards or leftwards, operates respectively
the tool holder carriage shifting rightwards or lef-
twards.
- Upwards or downwards lever: it respectively lowers
or lifts the tool holder arm (only for GG40256.11SL,
GG40256.15, GG40256T.15, GG40256D.15,
GG40256TD.15, GG40256.15SL, GG60360.15,
GG60360T.15, GG60360D.15 and GG60360TD.15
versions).
THE HANDLE MUST NOT BE PLA-
CED WHERE WATER STAGNATES.
Fig. 15