Basic Training Workbook
Version 1.5 - August 2007
49
Chapter 4: Basic Part Measurements (Metrology Mode)
19 Select the DATUM check box and choose B.
20 Select OK to measure the edge.
21 Measure the edge with the FARO Gage as shown.
•
Place the ball probe on the part and digitize points with the GREEN button.
•
Digitize 2 or more points on the edge. Note the direction in which you take the
points.
•
Pull away from the part and digitize 1 point with the RED button to complete the
command.
22 View the results of your measurement in the R
ESULTS
dialog box.
23 Select OK to add the edge to your FARO Gage part file.
•
This will be your X axis. The direction in which you take the points will determine
the direction of the axis.
(+)
Positive
Direction
