FARMSCAN 74V1 Скачать руководство пользователя страница 76

Страница: 76 / 103

February 2017

www.farmscanag.com

AM-74V1-4

Maintenance > System (4-1)

In most cases, the file will be downloaded to your DOWNLOADS folder on your windows PC. This
can be found by opening your Windows Explorer and navigating to this folder.

Right Click the 7000.zip folder and select EXTRACT ALL. Follow the prompts.

The window will now show the extracted 7000 file, and a new folder called 7000

Open the 7000 folder to reveal the 7000 File.

Right click on this and select SEND TO > USB (or it might simply be the drive letter of the USB)

Alternatively, you may simply COPY & PASTE the above file direct onto your USB stick.

10.

Navigate to your USB stick and confirm the 7000 file has copied over correctly.

11.

Eject the USB stick safely and insert into the USB socket on the AC-7000 cable at the rear of the
7000 unit

12.

BACKUP your existing settings. Refer to

Page 76

13.

Once the USB stick is inserted, Select UPDATE > BEGIN UPDATE

14.

The update will search the USB drive for the 7000 file and proceed with the update.

The following Status bar reveals the following if the upgrade does not work

10% - Internal system error – retry – fails again restart

ii.

20% - No USB detected – re-plug in – happens again – restart 7000

iii.

30% - Copy failed – instructions not followed – try again. OR change USB brand

iv.

60% - Update settings failed – retry update

70% - Old version clearing failed – retry update

vi.

80% - Update naming failed – retry update

Содержание 74V1








































































































Результаты поиска

Содержание 74V1

Отзывы:

FARMSCAN 74V1, Руководство оператора, Страница: 76 / 103

Результаты поиска

Содержание 74V1

Отзывы: