FARMSCAN 74V1 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 103

FARMSCAN 74V1 Скачать руководство пользователя страница 15

February 2017

www.farmscanag.com

AM-74V1-4

14

Control Bank Installation

CONTROL BANK INSTALLATION

3 & 5 SECTION KITS

The Farmscan Ag standard 3 and 5 section spray controller kit can be supplied with a pre-assembled
control bank that includes: pressure relief valve, proportional control valve, flow sensor and section control
valves ready to install on boom sprayers and low volume orchard/vineyard sprayers.

AA-74V1/3

Valve Bank Kit

3 Section Complete.

AA-74V1/5

Valve Bank Kit

5 Section Complete.

The optional dump valve and second spray line valve/s (AH-602/G) will be included in the control bank if
ordered with the original equipment, otherwise the control bank will need to be disassembled and fitted
with longer threaded rods and bolts to accommodate any optional extra valves.

The control bank must be installed on the sprayer in an upright position as shown in the diagram, or
undercover if mounted any other way. Mounting brackets on the control bank may be relocated as
necessary.

NOTE:

Alternative hose tails or threaded outlets are available separately.

Section/Dump Hose tail Outlet Options:

Section/Dump Only Threaded Outlet Options:

AH-628

½” Hose tail

AH-620

¾” BSP male outlet

AH-629

¾” Hose tail

AH-630

1” Hose tail

The 74V1 is designed to work with almost any spray valve on the market today. If you do not wish to use
our preferred option please contact us for compatibility. Valve adapters maybe required.

«
...
13
14
15
16
17
...
»

Содержание 74V1








































































































Отзывы:

Нет отзывов