FARMSCAN 74V1 Скачать руководство пользователя страница 30

Страница: 30 / 103

February 2017

www.farmscanag.com

AM-74V1-4

Device Menu Overview

Add Alarm

Create a new Alarm and set up its operating characteristics.

Remove Alarm

Removes the currently selected Alarm.

The selected Alarm is the row highlighted in blue in the Alarms list.

Edit Alarm

Edit the operating characteristics of the currently selected Alarm.

The selected Alarm is the row highlighted in blue in the Alarm list.

Reset Alarm Button

This button resets a tripped Alarm.

If an Alarm is tripped and still audible (buzzer still sounding) then the reset button will turn
off the sound.

If an Alarm is tripped and the state is OK then the reset button will reset the Alarm back to
its normal state, not its Tripped state, and turn off other Alarm indicators.

If an Alarm is tripped and the state is in Alarm then the reset button will NOT reset the
Alarm.

NOTE:

Making the Alarm inactive will turn off Alarm indicators, the Alarm will no

longer be monitored when Inactive though.

Содержание 74V1








































































































Результаты поиска

Содержание 74V1

Отзывы:

FARMSCAN 74V1, Руководство оператора, Страница: 30 / 103

Результаты поиска

Содержание 74V1

Отзывы: