FARMSCAN 74V1 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 103

FARMSCAN 74V1 Скачать руководство пользователя страница 71

February 2017

www.farmscanag.com

AM-74V1-4

70

Alarms (3)

ALARM OPTIONS

An Alarm can be set up with many different options.

1.

Alarm: Select the Alarm button to go to the Value and Unit Selection page.

a.

Select what value (speed, rate, tank level etc.) you wish to alarm.

b.

Once selected, choose a unit.

c.

Select the green Tick button to accept these changes.

2.

Alarm Level: Select to toggle between Normal and Critical.

a.

Normal: The Alarm will run as a notification alarm. The system will continue operating but
the user will be informed that the typical operating conditions have been breached.

b.

Critical: When a critical Alarm is triggered, the system will be forced out of Run Mode into
Hold Mode. These should be considered for safety and also as risk reduction/

3.

Alarm On: Select to toggle between Always and Run only.

a.

Always: The Alarm is always active.

b.

Run only: The Alarm will only activate when the implement is running.

«
...
69
70
71
72
73
...
»

Содержание 74V1








































































































Отзывы:

Нет отзывов