FARMSCAN 74V1 Скачать руководство пользователя страница 72

Страница: 72 / 103

February 2017

www.farmscanag.com

AM-74V1-4

Alarms (3)

Auto Reset: Select to toggle between Automatic and Manual.

Automatic: The Alarm will automatically reset once it is no longer in the Alarm state; the
user will not have to select the Reset button to reset.

Manual: The Alarm will not reset once it is no longer in the Alarm state; the user will have
to select the Reset button to reset.

Alarm Buzzer Period: Select to input a numerical value.

Enter a value in seconds for how long the audible warning will sound.

NOTE:

This is only the audible warning; the visual warning will last until reset.

Min Set Point: Select to toggle between On and Off.

On: When the value of the Alarm drops below the given Min Value it will go into the Alarm
state.

Off: When the value of the Alarm drops below the given Min Value it will not go into the
Alarm state.

Min Value: Select to input a numerical value.

Input the minimum value for the Alarm.

Max Set Point: Select to toggle between On and Off.

On: When the value of the Alarm goes above the given Max Value it will go into the Alarm
state.

Off: When the value of the Alarm goes above the given Max Value it will not go into the
Alarm state.

Max Value: Select to input a numerical value.

Input the maximum value for the Alarm.

Содержание 74V1








































































































Результаты поиска

Содержание 74V1

Отзывы:

FARMSCAN 74V1, Руководство оператора, Страница: 72 / 103

Результаты поиска

Содержание 74V1

Отзывы: