manualshive.com logo in svg

Farm King VT3290, Руководство оператора и каталог запасных частей, Страница: 34 / 232

Поделиться
Скачать
Farm King VT3290 Скачать руководство пользователя страница 34

Assembly - VT3000 Series

32

Leveling Link Assembly

Figure 31

Locate the leveling crank assembly (Item 1). Install 
straps (Item 2) 

[Figure 31]

 around the leveling 

crank assembly.

Connect the straps to an approved lifting device.

Raise and move the leveling crank assembly to 
the assembly area.

Figure 32

Lower the leveling crank assembly (Item 1), place 
the leveling crank assembly (jam nut forward) 
through the front mounting bracket (Item 2) on 
the main frame 

[Figure 32]

.

Lower the leveling crank assembly onto the main 
frame and remove front strap.

NOTE: Be sure grease fitting on trunion tube is 

facing up.

Figure 33

Place the front strap (Item 1) 

[Figure 33]

 over the 

leveling crank assembly (jam nut end).

Figure 34

Raise the front of the leveling crank assembly 
(jam nut end) and align clevis end (Item 1) 

[Figure 

34]

 with mounting bracket on the main rockshaft.

WARNING

Do not alter the leveling crank assembly. Machine 
may become unlevel and damage components.

2

1

1

1

2

2

1

Содержание VT3290









































































































































































































































Отзывы:

Нет отзывов