manualshive.com logo in svg

Farm King VT3290, Руководство оператора и каталог запасных частей, Страница: 229 / 232

Поделиться
Скачать
Farm King VT3290 Скачать руководство пользователя страница 229

Warranty - VT3000 Series

221

WARRANTY

Limited Warranty

BASE  LIMITED WARRANTY
Farm King provides this warranty only to original retail purchasers of its products. Farm King warrants to such 
purchasers that all Farm King manufactured parts and components used and serviced as provided for in the 
Operator’s Manual shall be free from defects in materials and workmanship for a period following delivery to 
the original retail purchaser of three (3) years. This limited warranty applies only to those parts and components 
manufactured by Farm King. Parts and components manufactured by others are subject to their manufacturer’s 
warranties, if any.
100% Parts and Labor are covered for the first year.
100% Parts only, are covered for the second year.
50% Parts only, are covered for the third year.
Farm King will fulfill this limited warranty by, at its option, repairing or replacing any covered part that is defective 
or is the result of improper workmanship, provided that the part is returned to Farm King within thirty (30) days 
of the date that such defect or improper workmanship is, or should have been, discovered. Parts must be returned 
through the selling representative and the buyer must prepay transportation charges.
Farm King will not be responsible for repairs or replacements that are necessitated, in whole or part, by the use of 
parts not manufactured by or obtained from Farm King. Under no circumstances are component parts warranted 
against normal wear and tear. There is no warranty on product pump seals, product pump bearings, rubber product 
hoses, pressure gauges, or other components that require replacement as part of normal maintenance.
Farm King warrants that the following disc gang bearing parts used and serviced as provided for in the Operator’s 
Manual shall be free form defects in materials and workmanship for an extended period following delivery to the 
original retail purchaser.
T2-215 bearings are covered for seven (7) years. Extended coverage (12-84 months) is limited to replacement of ball 
bearings and seals only. Labour and associated bearing parts are not included.

REPAIR PARTS LIMITED WARRANTY
Farm King warrants genuine Farm King replacement parts purchased after the expiration of the Farm King Limited 
Warranty, and used and serviced as provided for in the Operator’s Manual, to be free from defects in materials or 
workmanship for a period of thirty (30) days from the invoice date for the parts. Farm King will fulfill this limited 
warranty by, at its option, repairing or replacing any covered part that is defective or is the result of improper 
workmanship, provided that the part is returned to Farm King within thirty (30) days of the date that such defect or 
improper workmanship is, or should have been, discovered. Such parts must be shipped to the Farm King factory 
at the purchaser’s expense.

COMMERCIAL USE
Warranty for commercial (other than bona fide farmers), rental, or custom use is limited to 100% parts and labor 
for ninety (90) days.

WHAT IS NOT COVERED
Under no circumstances does this limited warranty cover any components or parts that have been subject to 
the following: negligence; alteration or modification not approved by Farm King; misuse; improper storage; lack 
of reasonable and proper maintenance, service, or repair; normal wear; damage from failure to follow operating 
instructions; accident; and/or repairs that have been made with parts other than those manufactured, supplied, 
and / or authorized by Farm King.

Содержание VT3290









































































































































































































































Отзывы:

Нет отзывов