Farm King VT3290 Скачать руководство пользователя страница 105

Страница: 105 / 232

Operation - VT3000 Series

103

If the VT3000 hitch needs to be adjusted, stop
the tractor when drawbar is just in front of the
VT3000 hitch.

Leave the operator’s position.

Figure 158

Turn the handle (Item 1)

[Figure 158]

clockwise to

raise the hitch or counterclockwise to lower the
hitch.

Lower or raise the VT3000 hitch until aligned with
the tractor’s drawbar.

Move to the operator’s seat, start the engine and
release the parking brake.

Move the tractor backwards, aligning the drawbar
hitch pin hole with the VT3000 hitch pin hole(s).

Stop the tractor and leave operator’s position.

WARNING

AVOID INJURY OR DEATH

Keep fingers and hands out of pinch points when
connecting and disconnecting equipment.

NOTE: Always use a hitch pin of adequate size and

strength and a retaining pin with a locking
device.

NOTE: The following image may not show your

drawbar safety chain exactly as it appears
but the procedure is correct.

Figure 159

Install the hitch pin (Item 1)

[Figure 159]

and

retaining pin to securely fasten the VT3000 hitch
to the tractor drawbar.

Attach the safety chain (Item 2)

[Figure 159]

around

the drawbar mount.

NOTE: Always use a safety chain with a strength

rating greater than the gross weight of the
towed machine.

Содержание VT3290









































































































































































































































Результаты поиска

Содержание VT3290

Отзывы:

Farm King VT3290, Руководство оператора и каталог запасных частей, Страница: 105 / 232

Результаты поиска

Содержание VT3290

Отзывы: