manualshive.com logo in svg

Farm King VT3290, Руководство оператора и каталог запасных частей, Страница: 230 / 232

Поделиться
Скачать
Farm King VT3290 Скачать руководство пользователя страница 230

Warranty - VT3000 Series

222

Limited Warranty

AUTHORIZED DEALER AND LABOR COSTS
Repairs eligible for labor under this limited warranty must be made by Farm King or an authorized Farm King 
dealer. Farm King retains the exclusive discretion to determine whether it will pay labor costs for warranty repairs 
or replacements, and the amount of such costs that it will pay and the time in which the repairs will be made. If 
Farm King determines that it will pay labor costs for warranty work, it will do so by issuing a credit to the dealer’s or 
distributor’s account. Farm King will not approve or pay invoices sent for repairs that Farm King has not previously 
approved. Warranty service does not extend the original term of this limited warranty.

WARRANTY REQUIREMENTS
To be covered by warranty, each new product must be registered with Farm King within thirty (30) days of delivery 
to original retail purchaser. If the customer decides to purchase replacement components before the warranty 
disposition of such components is determined, Farm King will bill the customer for such components and then 
credit the replacement invoice for those components later determined to be covered by this limited warranty. Any 
such replacement components that are determined not be covered by this limited warranty will be subject to the 
terms of the invoice and shall be paid for by the purchaser.

EXCLUSIVE EFFECT OF WARRANTY AND LIMITATION OF LIABILITY
TO THE EXTENT PERMITTED BY LAW, FARM KING DISCLAIMS ANY WARRANTIES, REPRESENTATIONS, OR 
PROMISES, EXPRESS OR IMPLIED, AS TO THE QUALITY, PERFORMANCE, OR FREEDOM FROM DEFECT OF THE 
COMPONENTS AND PARTS COVERED BY THIS WARRANTY AND NOT SPECIFICALLY PROVIDED FOR HEREIN.
TO THE EXTENT PERMITTED BY LAW, FARM KING DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE ON ITS PRODUCTS COVERED HEREIN, AND DISCLAIMS ANY 
RELIANCE BY THE PURCHASER ON FARM KING’S SKILL OR JUDGMENT TO SELECT OR FURNISH GOODS FOR 
ANY PARTICULAR PURPOSE. THE PURCHASER’S ONLY AND EXCLUSIVE REMEDIES IN CONNECTION WITH THE 
BREACH OR PERFORMANCE OF ANY WARRANTY ON FARM KING’S PRODUCTS ARE THOSE SET FORTH HEREIN. 
IN NO EVENT SHALL FARM KING BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, 
BY WAY OF EXAMPLE ONLY AND NOT LIMITATION, LOSS OF CROPS, LOSS OF PROFITS OR REVENUE, OTHER 
COMMERCIAL LOSSES, INCONVENIENCE, OR COST OF REPLACEMENT OF RENTAL EQUIPMENT). IN NO EVENT 
SHALL FARM KING’S CONTRACT OR WARRANTY LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT. (Note 
that some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of 
incidental or consequential damages, so the above limitations and exclusion may not apply to you.) This warranty 
gives you specific legal rights and you may also have other rights, which vary from state to state.
Farm King neither assumes nor authorizes any person or entity, including its selling representatives, to assume any 
other obligations or liability in connections with the sale of covered equipment, or to make any other warranties, 
representations, or promises, express or implied, as to the quality, performance, or freedom from defect of the 
components and parts covered herein. No one is authorized to alter, modify, or enlarge this limited warranty, or its 
exclusions, limitations and reservations.
Corrections of defects and improper workmanship in the manner, and for the applicable time periods, provided for 
herein shall constitute fulfillment of all responsibilities of Farm King to the purchaser, and Farm King shall not be 
liable in negligence, contract, or on any other basis with respect to the subject equipment.
This limited warranty is subject to any existing conditions of supply which may directly affect Farm King’s ability to 
obtain materials or manufacturer replacement parts.
Buhler Industries Inc. reserves the right to make improvements in design or changes in specifications to its products 
at anytime, without incurring any obligation to owners of units previously sold.

Содержание VT3290









































































































































































































































Отзывы:

Нет отзывов