FANOX SIL-D00, Руководство пользователя, Страница: 100 / 226

www.fanox.com Rev.06 100/226
7.5. Setting up the session: Password and access levels
Users must identify themselves with a password in order to Pickup communications and to
change the equipment settings or configuration using the HMI. Depending on the access
level, it may or may not be possible to perform the operations shown on the table below.
ACCESS
LEVEL
Read-only permission:
Status and measurements
Settings
Events
Permission to:
Change settings
Download and Delete the
Events buffer
Permission to:
Execute
Commands
Permission to:
Change
Configuration
Permission to
Change
Protected
Settings
1 YES YES NO NO YES
2 YES YES NO NO NO
3 YES NO YES NO NO
4 YES YES YES NO NO
5 YES YES YES YES NO
Four passwords and their associated levels of access are set up when the equipment is
configured using the SIcom program. Four passwords and their associated levels of
access are set up when the equipment is configured using the SIcom program. It is
possible to change the passwords The password must have 4 characters. By default, the
equipment is programmed with the following passwords and their associated levels:
PASSWORD ACCESS LEVEL
2222 2
3333 3
4444 4
5555 5