FANOX SIL B, Руководство пользователя

Страница: 65 / 311

www.fanox.com Rev.23 65/311
The rest of the settings are grouped by functions to facilitate their operation. These groups are subject
to tables.
The equipment identifier setting can only be adjusted through communications.
The frequency setting is read-only.
The rest of the settings can be modified equally from the HMI or through communications.
Any change to settings involves resetting the functions, regardless if they are active or not.
4.20. Settings Group
There are three group settings tables and one general table. The settings table which is active at a
specific moment can be modified in two ways:
•
Changing the active Table settings. In the general group there is a setting which establishes which
table is active.
•
By means of two inputs. To this end four possibilities are defined.
00 This situation is governed by the active table settings.
01 Table 1
10 Table 2
In the zero position the active item is defined by the active table settings defined in the general group.
Regarding other options, regardless of that established by the settings, the inputs prevail over the
settings.
If the use of both inputs is not required, then one can be used, but depending on which is used, operation
can be done with table 1 or table 2.