FANOX SIL B, Руководство пользователя

Страница: 143 / 311

www.fanox.com Rev.23 143/311
7.6. Menus
7.6.1. Default screen
The default screen shows the device model and the currents in phase A, phase B, phase C, and
Neutral. Press “OK” to select a menu: measurements, states, settings, and events. If the HMI is
left in any state, it will return to the default screen after 5 minutes without any key being pressed.
SILB555B2000BA
0.00 0.00 0.00 0.00
If an error is detected through the diagnostics, an error message will appear on the second line
of the main screen (in place of the currents) showing the following information, as applicable: (see
the section on diagnostics)
•
PROTECTION ERROR
•
MEASUREMENT ERROR
•
EEPROM ERROR
7.6.2. Last Trip screen
When a trip occurs, the default screen alternates with the last trip screen, showing the cause of
the trip and the time and date of its occurrence.
Even is auxiliary power is lost, when the SIL-B regains power, it will retain information on the last
trip. The last trip screen will only disappear when the “RESET” button is pressed and held down.
7.6.3. Menu access
Use the ▲, ▼, ◄ and ► keys to access different menus and options. To select and enter an
option or menu, use the “OK” key. To go back one level of the menu system, use the “C” key.
No password or passcode is necessary to view parameters, measurements, settings, etc.
A 4 digit passcode is necessary to change any parameter.
After returning to the main screen after changing a setting, the passcode must be entered again
to make any additional changes.
To switch between units in a parameter, use the ◄ and ► keys. To modify a setting, use the ▲
and ▼ keys to increase or decrease the value. If an incorrect value is input during this process,
use the “C” key to delete it.
The following section gives the most graphical description possible of menu navigation.
7.6.4. Date-Time menu
Trip 27P1
13/01/11 13:51:44825