FANOX SIL B, Руководство пользователя

Страница: 115 / 311

www.fanox.com Rev.23 115/311
In the following example:
•
input 1 is assigned to contact a of the circuit breaker.
•
input 2 is assigned to contact b of the circuit breaker.
•
input 3 is assigned to the function 50P block.
•
input 4 is assigned to the function 50N/G block.
•
In addition, it is understood that there is an additional protection, which starts up 79 and
assigns input 5 to said start. As well as bouncing the trip, this input allows the oscillography
to start up.
•
A key is provided (input 6), which allows the 79 to be locked.
•
Similarly, this protection starts up the circuit breaker fault with input 7
•
and finally, the active table is controlled with input 8
•
The 79 permission function is not assigned to anything in particular, as a synchronizer is not
necessary for closure. However, in this case it is best to prohibit the wait time of the recloser.
Logical inputs Inp1 Inp2 Inp3 Inp4 Inp5 Inp6 Inp7 Inp8
Not configured
Input 52 a X
Input 52 b X
50P block input X
50N/G block input X
External trip input X
Fault init Input X
79 init input X
Permission 79 input
Locking 79 level input X
Input-1 Table Active
Input-2 Table Active X
Locking 79 input pulse
Unlock 79 pulse input
50BF init input X