FANOX SIA D Скачать руководство пользователя страница 77

Страница: 77 / 117

www.fanox.com

SIA-D_

Rev. 07

77 / 117

ISO 9001:2008

8.9. Commissioning

It is recommended that the following safety measures are taken before starting up the facility for
the first time, or after a trip event:

•

FANOX recommends the use of the KitCom accessory with a battery in the front port.

This additional energy source allows the relay to be monitored and the trip to function
without the need for self power in any breakdown situation.

•

Once all of the connections have been made, we recommend a check to make sure that

they are correct, safe and well attached.

•

The "complete test" menu procedure should be applied.

NOTE! See 5.12.

•

It is important to check that the measurements are correct once the facility has been

powered up.

Maintenance

FANOX recommends a minimum of one facility inspection per year, to at least go

through the test menu and check the values of the measurements.

Содержание SIA D






















































































































Результаты поиска

Содержание SIA D

Отзывы:

FANOX SIA D, Руководство пользователя, Страница: 77 / 117

Результаты поиска

Содержание SIA D

Отзывы: