FANOX SIA D, Руководство пользователя, Страница: 73 / 117

www.fanox.com
SIA-D_
Rev. 07
73 / 117
ISO 9001:2008
returned to automatically or manually. The system returns automatically to the standby mode
screen if no key is pressed for five minutes.
The factory setting password for the equipment is 5555. The password can be changed using
the SICom program.
The keys ▲ , ▼ , ◄ and ► are used to enter the password. ▲ and ▼ are used to introduce a
value or a character, and the ◄ and ► keys are used to move from one character to another. If
it is necessary to change one of the password characters or numbers due to an error, press "C"
to delete it. Press "OK” to validate the password.
COUNTERS
52 Openings Number
52 Accumulated Amps
"OK"
"C"
----
----
"C"
7.7.14. Commands Menu
The first line of menus can be accessed from the standby mode screen by pressing the “OK”
key. Use the “
▲ ” and “ ▼ ” keys to move the cursor through the different screens until it is
positioned over the "COMMANDS" screen. Press "OK" and use the “ ▲ ” and “ ▼ ” keys to view
the different possible commands. Press the "OK" key to perform a command, and press the
"OK" key again to confirm the command.
COMMANDS
EXECUTE COMMAND y/n
EXECUTE COMMAND y/n
"OK"
"C"
Open Breaker
Close Breaker
"C"
CONFIRM COMMAND y/n
Open Breaker
CONFIRM COMMAND y/n
Close Breaker
"OK"
"C"
"OK"
"C"
"OK"
"OK"
7.7.15. Input Configuration menu
To assign a logical input to a physical input, go to the “INPUT STATUS” menu. If “OK” is
pressed from the screen that displays the input’s status (activated or deactivated), the current
status of the logical input will disappear and the physical input that it is associated with will be
displayed. To change the associated logical input, press “OK” and use the “
▲ ” and “ ▼ ” keys to
find the desired physical input. Confirm the choice by pressing “OK”. Go up through the menu
levels by pressing the "C" key.