FANOX SIA D, Руководство пользователя, Страница: 64 / 117

www.fanox.com
SIA-D_
Rev. 07
64 / 117
ISO 9001:2008
•
Configuring the modbus address
•
Reading and changing counters
•
Processes for opening and closing the circuit breaker
•
Configuration of the inputs
•
Configuration of the outputs
•
Configuration of the causes that start an oscillographic register
7.6. Setting-up the session: Password and access levels. Protected Settings
Users must identify themselves with a password in order to start communications and to change
the equipment settings or configuration using the HMI. Depending on the access level, it may or
may not be possible to perform the operations shown on the table below.
ACCESS
LEVEL Read-only
permission:
Status and
measurements
Settings
Events
Permission to:
Change
settings
Download and
Delete the
Events buffer
Permission to:
Execute Commands
Permission to:
Change
Configuration
Permission to
Change
Protected
Settings
1 YES YES NO NO YES
2 YES YES NO NO NO
3 YES NO YES NO NO
4 YES YES YES NO NO
5 YES YES YES YES NO
Four passwords and their associated levels of access are set up when the equipment is
configured using the SIcom program. By default, the equipment is programmed with the
following passwords and their associated levels:
PASSWORD ACCESS LEVEL
2222 2
3333 3
4444 4
5555 5
•
No password is needed to perform the commands using the HMI.
•
The SIA-D does not have protected settings.