FANOX SIA D, Руководство пользователя, Страница: 65 / 117

www.fanox.com
SIA-D_
Rev. 07
65 / 117
ISO 9001:2008
7.7. MENUS
7.7.1. Standby mode screen
The standby mode screen displays the equipment model. The first line of menus can be
accessed by pressing "OK": measurements, status, adjustments and events. If the HMI is left in
any position, it returns automatically to its standby mode screen after five minutes if no key is
pressed.
If any error is detected by the self-diagnosis, an error message appears in the second line
(instead of the word "FANOX”) on the main screen, which can show any of the following
information: (see inside self-diagnosis section).
•
PROTECTION ERROR
•
MEASUREMENT ERROR
•
EEPROM ERROR
7.7.2. Accessing the menus
The keys ▲ , ▼ , ◄ and ► are used to navigate through the different options and menus. The
“
OK
” key is used to accept and to enter and menu or an option. The “
C
” key is used to move up
through the menu levels.
It is not necessary to enter any password to read or view the parameters, measurements or
settings…
A 4-character password must be entered in order to modify any parameter.
After returning to the main screen, the password must be entered again to make any further
modifications.
The keys ◄ and ► are used to navigate from one item to another within a parameter. The keys
▲ and ▼ are used to increase or decrease the value. If an invalid value is entered during the
process, the “
C
” key can be used to delete it.
The navigation through the menus is described as graphically as possible below.
7.7.3. Date-time menu
The date-time menu can be accessed by pressing the “ ► ” key from the standby mode screen.
From here, press the “OK” key to access the date-time modification screen. Use the “ ► ” and
“ ◄ ” keys to position the cursor over the digit that you want to change, and assign a value to this
digit using the “ ▲ ” and “ ▼ ” keys. Once the date-time has been entered, press “OK” to change
the equipment date. Press the “C” key to return to the standby mode screen.
The date-time information can be viewed by pressing the “ ► ” key from the main screen.
SIAD51520023S
FANOX