F&F Filipowski sp. j.
Konstantynowska 79/81 95-200 Pabianice
phone/fax: (+48 42) 215 23 83 / 227 09 71 POLAND
http://www.fif.com.pl e-mail: [email protected]
WORKING TIME METER
Do not dispose of this device to a garbage bin with other unsorted waste!
In accordance with the Waste Electrical and Electronic Equipment Act
any household electro-waste can be turned in free of charge and in any
quantity to a collection point established for this purpose, as well as to the
store in the event of purchasing new equipment (as per the old for new rule,
regardless of brand). Electro-waste thrown in the garbage bin or abandoned
in the
bosom of nature pose a threat to the environment and human health.
CLG-13T
230V
WARRANTY.
The F&F products are
covered by a warranty of the 24 months
from the date of purchase. Effective only
with proof of purchase. Contact your
dealeror directly with us. More
information how to make a compliant can
be found on the website:
www.fif.com.pl/reklamacje
5
9 0 8 3 1 2
5 9 1 8 6 3
- 1 -
- 2 -
PURPOSE
Working time meters are intended for counting the number of working
hours in automatic production processes or the number of device
working hours, which, due to safety requirements and operation
efficiency have limited overhaul life, i.e operational capacity that may
not be exceeded (e.g. advanced power units, special radioactive lamps,
etc.).
ASSEMBLY
FUNCTIONING
CLG-13T meter is an electronic, one-way meter, enabling the counting
of working hours from 0 to 99999,9 range (five one decimal). It
is equipped with RESET input for the connection of external button and
RESET button in front (with locking), enabling counter state reset for
any value.
1. Take OFF the power.
2. Unscrew the nut and remove the attachment plate.
3. Embed meter
in the
assembly hole, attach plate and tighten the cap
screws.
4. T
o joints
U (
read
input
) connect the voltage
which is
controll
ing
signal
of
work
receiver
.
5.
To
RESET
joints
connect
monostabile close button
.
ATTENTION!! Do
not connect any voltage.
WIRING DIAGRAM
D141121
supply (non-voltage type)
internal battery
battery life
5 years
read input voltage
110÷240V AC/DC
input RESET
non-voltage type
display
6 characters / h=6,7mm
precision
1%±1digit)
working temperature
-10÷40°C
dimensions
48×24×52mm
fixing hole
45×23mm
TECHNICAL DATA
U
RESET
+
+
