ASSEMBLY
TECHNICAL DATA
Supply
24÷264v AC/DC
INPUT voltage
10÷264v AC/DC
RESET voltage
24÷264v AC/DC
Current load of joint 1P
8A
Power consumption
1,5W
Connections
screw terminals 2,5mm
Working temperature
-20÷50°C
Dimensions
3 modules (52,5mm)
Fixing
on the rail TH-35
A100219
The system allows you to enter the PIN number, any number of
times, preventing the device blocked by too many errors at the
administration password
After entering the password the user has full access to the menu.
While no user activity for fifteen seconds (identified by the lack of
pressing any button) again causes the shift of the meter in safe
condition. The display mode of meter state when the system is not
yet secured is signaled by flashing key symbol. When the meter
goes to a safe condition, the key is displayed in a continuous
way.The device is not implemented any special passwords to
unlock. In the case of locked due to forgotten passwords, you can
delete a security giving the signal to unlock input 5 and 6 at the
time of attaching the supply voltage.
ATTENTION!
1) Turn the power distribution box in which the device is
attached.
2) Mount the device on the rail.
3) Connect power cable to joints 1 or 2.
4) Connect the other cables, according to the scheme. Please
note that when working with DC signals it is important to
maintain proper polarity.
5) Turh On the power of switchbox and of the meter.
8
4
-
3
RESET
+
-/~
AC/DC
1
2
11
12
7
ˇ
U
10
+/~
WIRING DIAGRAM
ATTENTION!
No unauthorised modifications are to be made in the relay
otherwise the device may be damaged or malfunction which in
turn may lead to damage of the protected engine and jeopardise
its operators. Should this warning be ignored, the producer
cannot be held responsible for any related events and is entitled
to deem this warranty invalid in the case of any complaint.
External signal does not permanently remove the security of
meter. After re-attached the power PIN is enabled
OK
+1
-1
p
q
MENU
"
MENU
PIN
>> 0
PIN
>> **3
00000999
>>
Incorrect
PIN
WARRANTY
1.The duration of the warranty is 24 months from the date of
purchase.
2.The warranty is valid with the receipt only.
3.Complaints must be filed at the point of purchase or directly with
the producer (tel. no. 42-2270971, e-mail: [email protected]).
4.Within the warranty period, the producer undertakes to repair or
replace the relay within 14 days from the date the unit is delivered
to the service point.
5.The purchaser has the right to have the relay replaced or to
receive a refund if an indelible defect is revealed.
6.This warranty does not cover the following:
-mechanical or chemical defects,
-defects which stem from improper use contrary to the user's
manual,
-defects which appear after the unit has been sold due to
accidents or other events for which neither the producer nor the
point of sale can be held responsible, e.g. transport damage, etc.
7.This warranty does not cover any operations which, according
to the manual, should be done by the user, e.g. mounting of the
relay, installation of the electrical system, installation of other
required electrical protection devices, recommended inspections
and tests, etc.
