Falcon RJ-8000 Скачать руководство пользователя страница 70

Страница: 70 / 190

3 Basic Installation

RJ-8000 OPERATION MANUAL

3-28

5. Select an item among the following and press the appropriate key, from [F1] key to [F4] key.

6. Print the information on the selected item.

7. After printing, the printer returns to the normal status.

3.7.1 Setup List

Use this function to check the current status of the printer.

NOTE

Please attach the SetupPrint data on this page.

TIP

For printing, refer to the following.

3.7 Testprinting

Setup items

Key
name

Parameters

Descriptions

Test Print (1/2)

Setup

Perform Setup Llist.

3.7.1 Setup List

Nozzle check

Perform Nozzle check.

3.7.2 NozzleCheck

Adj.Uni-D

Perform Alignment fot the uni-direction printing.

3.7.3 Alignment

Adj.Bi-D

Perform Alignment fot the bi-direction printing.

3.7.3 Alignment

Test Print (2/2)

Palete

Perform Color Palette.

3.7.4 Color palette

Mainte.

Perform Maintenance record.

3.7.5 Maintenance record

ＲｅａｄｙｔｏＰｌｏｔ
ＣａｎｃｅｌＬｅｖｅｒＵｐ
ＣｕｔＲｏｌｌＣｌｅａｎｉｎｇ
Ｕｓｅｒ１４３ｍ

Содержание RJ-8000































































































































































































Результаты поиска

Содержание RJ-8000

Отзывы:

Falcon RJ-8000, Руководство пользователя, Страница: 70 / 190

Результаты поиска

Содержание RJ-8000

Отзывы: