Falcon RJ-8000, Руководство пользователя, Страница: 22 / 190

1 Safety Instructions RJ-8000 OPERATION MANUAL
1-4
Do not cut hard objects or drop the cutter. Doing so may damage or chip the cutter blade.
Do not touch the cleaning wiper or the head cap unit while cleaning the cleaning wiper. Doing
so may result in poor head cleaning because of oil on your hands.
Do not tilt the printer, stand it against a wall, or turn it upside down. Doing so may cause ink
to leak inside the printer. Also, movement after transport is not covered by the warranty.
When installing options, do not touch the elements on the circuit board. The elements on the
boards can be very hot, and can cause burns.
Have four or more people unpack and assemble the printer.
When lifting the printer out of the packing box, be sure to remove the vinyl cover first, then
grab the holding grips on the sides of the printer. lifting the printer with the vinyl cover on may
cause your hands to slip and drop or damage the printer.
Have two or more people transport the printer.
Ensure that the plug has been disconnected from the power socket when it is not to be used for
a long time.
Earth wires must be connected to wires or terminals that fulfill the conditions below.
•
Earth terminals of power sockets
•
Earth wires with copper morsel that is at least 650 mm under the ground
Earth wires must be connected to wires or terminals that fulfill the conditions below.
When setting roll media, place it on top of a desk or other flat surface. Setting roll media with
the scroller standing up may damage them.
Keep the printer horizontal during transportation.
Be sure to do the following before attaching options.
•
Turn the printer off
•
Unplug the power cord from the socket
•
Unplug cables connected to the printer.
Otherwise, damage to the printer or your computer may occur.
•
Remove electrostatic charge form your clothes and body by touching the metal parts of the
printer.
Electronic components such as the memory may malfunction if exposed to an electrostatic
charge.